No Comments

How To Make A Custom Rug Out of Fabric

How To Make A Custom Rug Out of Fabric

How To Make A Custom Rug Out of Fabric?

A rug is more than a covering piece that improves the comfort of your home with its elegant texture, eye-catching pattern, and versatile colors. Other than getting ready-made rugs, it’s also a great idea to design one on your own. Crafting a custom-made rug is not a challenging DIY project, it only requires a precise guide and some household supplies.

In this article, Rug Dubai has demonstrated the complete procedure for making custom rugs out of fabric in a few steps. By following these steps, you can fabricate a durable, attractive, and easily maintainable floor rug for your home.

Crafting A Custom Rug Out Of Fabric

A tailor-made rug allows you to improve the look of your floors in living rooms, bedrooms, kitchens, or hallways. This type of rug will be different from common rugs that are designed in bulk. Moreover, In this project, we will craft a rug with remnants or leftovers of vinyl flooring. For making a rug out of fabric, we have enlisted some necessary tools.

Supplies Needed To Make Custom Rug

  • Vinyl Flooring Remnants
  • T-Square
  • Mat Knife
  • Fabric
  • Stiff Paint Brush
  • Scissors
  • Duct Tape
  • Spray Blue
  • Gloss Finish

Steps To Follow

  1. Cutting Of Vinyl Flooring Remnant
  2. Spray Vinyl With White Paint (Optional)
  3. Cutting Of Fabric To Desired Size
  4. Apply Spray Glue On Fabric
  5. Coat Fabric With Polyurethane
  6. Check Polyurethane Coverage
  7. Turn Rug Over
  8. Glue Excess Fabric To The Edges Of Rug
  9. Secure Edges Of Backing Fabric
  10. Add Few More Coats Of Polyurethane

1

Cut Vinyl Flooring Remnants

Cut Vinyl Flooring Remnants

To start this project, you can buy vinyl remnants from any flooring store at very low rates. You need to cut this remnant piece as per the desired rug size with the aid of a mat knife. While running the knife on a vinyl surface, always utilize the T-square for straight and precise cutting.

2

Spray Vinyl With White Paint (Optional)

If you have a light-colored fabric for rug manufacturing, this optional step is for you. You need to color the vinyl surface with white paint by using a spray or brush. Moreover, you can also cover the surface by applying a slight coating of white primer.

3

Cut Fabric To Desired Size

Now, you will cut the fabric material as per the desired rug size. Turn the vinyl upside surface down and attach it to the back side of your fabric material for cutting. While cutting, leave an extra 3 inches in the entire periphery of the fabric for turning around the vinyl sheet.

4

Apply Spray Glue On Fabric

After cutting, you need to flip both the fabric and vinyl layer to add glue. Always utilize the best quality glue that can ensure strong adherence. Spray the glue on the back side of the fabric material and the top side of the vinyl sheet. It must be ensured that there are no bubbles or creases found between both these layers.

5

Coat Fabric With Polyurethane

Coat Fabric With Polyurethane

In this step, you’ll need to coat the fabric surface with polyurethane (PU) material. Apply one layer of water-based PU to the surface with the aid of a stiff bristled brush. Leave the fabric for at least 12-14 hours to dry completely. When it dries, apply a second layer of polyurethane for high consistency.

6

Check Polyurethane Coverages

After applying 2 coatings of PU, now you have to check the fabric surface for smoothness. If you find the surface rough due to loose weave and fiber grain, you need to apply a third coating of PU. However, a fabric with a tight weave doesn’t need any further coating. Our main purpose is to make the fabric surface smooth to prevent the buildup of dust particles and the cleaning requirements of rugs.

7

Turn Rug Over

Turn Rug Over

When your rug fabric surface has been dried and smoothened, turn it over the vinyl sheet by sewing the edges. Now, the fabric surface has become stiff due to multiple coatings of PU. But you need to turn it at the edges forcefully to avoid any crease or bubble on the rug.

8

Glue Excess Fabric To The Edges Of Rug

You should also add extra glue to all sides of the rug for a strong attachment of turnover fiber with the vinyl sheet. Never apply the glue on all sides at the same time. Apply it on all sides one by one to keep it from getting dry. Move to the other side only when you have finished turning on one side.

9

Secure Edges Of Backing Fabric

To secure the edges of the turned fabric around the vinyl sheet, you can use any heavy-duty tape. This tape will prevent the fabric material from fraying. You can also utilize plastic taps for firm attachment.

10

Add Few More Coats Of Polyurethane

In the end, you should again analyze the nature of your fabric material. If its surface is rough, you can also apply more coats of PU to make your rug more durable, waterproof, and stain and dust-resistant. Furthermore, multiple coatings of PU will also enhance the flexibility of your area rugs for placement.

Final Words!

To sum up this unique and creative guide, we can say that crafting a rug out of fabric material is an easy DIY project that can be accomplished with little effort and simple techniques. For your ease, Rug Dubai has demonstrated all the essential steps comprehensively. So if you want to fabricate a tailor-made rug with your desired size, color, texture, and design, you must follow these simple yet effective techniques.

You might also like